Via Mercalli 4/A
43122, Parma, ITALY
Working Hours:
8:00am – 5:00pm
Saturday and Sunday: closed
WASHING MACHINE LAVADO FOR 5 GALLONS LINES
THE INTERNAL BOTTLES CLEANING: A SIMPLE BUT SENSITIVE PROCESS
Although simple to clean, the return bottle requires washing machines with an accurate cycle for the washing processes. Starting from a long experience with washing machines for different production speeds still available in the range, in recent years METALNOVA‘s research and development efforts have focused on washing machines that can be made in a rotary and linear version based on the bottle size and the speed of production.
Machine with intermittent movement.
Bottle infeed and spacing with worm screw.
Container loading with pneumatic grippers, with gripping sectors cover with rubber not to damage the external surface of the container.
Container carrying inside the machine with stainless steel bars connected to the chain and equipped with plastic pockets that centre the container in the neck.
The solution with pockets allows not having mechanical elements inside the machine and washing the external surface of the container.
Container down loading on the exit conveyor with pneumatic grippers, with gripping sectors cover with rubber not to damage the external surface of the container.
Machine completely manufactured in stainless steel.
Protection of the loading downloading zones with safety guards with tempered glass panels that can be opened.
Water collection tanks in the lower part of the machine, equipped with inspection doors. The discharges of the tanks are collected in to one single point.
Circulation pumps in s/s with large filters on the suction.
On the delivery pneumatic valves are installed to stop the jet of the nozzle during the advancing phase of the machine.
System of cone spraying nozzles.
Heating of the hot washing tank with external steam exchanger.
Washing zones internal lightening.
Motorisation by screw worm motor reducer with electronic device for the positioning of the rows.
Safety joint on the traction shaft.
“Free standing” electrical cabinet and push button panel on the machine.
Inverter Danfoss and PLC Siemens.
OPTIONS:
Special TURBOJET systems for internal and external washing.
Mobile separators between the zones of the machine.
Steam suction.
Blowers for water removal from the bottles bottom.
Downloading zone cover with HEPA filters hoods.
Automatic dosing of the detergent and sanificant product.
EXTERNAL WASHING SYSTEM TURBO
The device is based on a U shape element equipped with nozzles which rotates around the containers.
The nozzles are fed by a 4 bar pump.
The benefits of the system are:
Guarantee to clean at 360° the container.
Elimination of the brushes and therefore of the fall of the bristles inside the baths.
No damages of the external surface of the container.
INTERNAL WASHING SYSTEM WITH PENETRATING NOZZLES
The system is based on a pipe which enter inside the container and that has a rotating nozzle at its extremity.
The nozzles are fed by a 4 bar pump.
The benefits of the system are:
Efficiency increase of the washing because the washing water is sprayed from inside the bottle and not from outside.
Guarantee to clean all the internal surface with direct jets and not with draining water.
Increase of the washing water flow rate, because the exiting water doesn’t stop the incoming water.
REQUEST YOUR COMMERCIAL OFFER NOW!
REQUEST YOUR COMMERCIAL OFFER NOW!
Via Mercalli 4/A - 43122 Parma – ITALY
+39 0521 607568
info@mnmetalnova.it
WORKING HOURS
08:00 AM – 12:00 AM – 1:30 PM – 5.00 PM
CONTACT US