m

Our Mission Statement

Contact Us

  • +39 0521 607568
  • info@mnmetalnova.it
  • Via Mercalli 4/A 43122 Parma, Italy; ITALY
FOLLOW US ON OUR
OFFICIAL CHANNELS
Contact: +39 0521 607568
info@mnmetalnova.it
Via Mercalli 4/A
43122, Parma, ITALY
Working Time: 08:00 - 17:00
Saturdays and Sundays: CLOSED
Top

VMAG – STILL WATER

ELECTRONIC VOLUMETRIC FILLING SYSTEM BASED ON MAGNETIC FLOWMETERS

THE MODERN SYSTEM TO FILL STILL WATER IN HYGENIC AND FLEXIBLE CONDITIONS

Electronic volumetric filling system based on magnetic flow meters.
The functioning of these instruments is guaranteed for still products with specific electric conductivity higher than 50 uS/cm (value to be considered at the filling temperature).
Filling without contact between bottle and filling valve.
F
illing valve opening by pneumatic electro valve driven by bottle presence sensor signal (opening) and flow meter signal (closure).
Double filling speed, to guarantee reduced filling time and to avoid product splash out.
Electric board for the flow meter signal management and electro valves for filling valve controls installed on the carousel to guarantee easy access.
Volume set up for each filling valve in the operator touch screen panel.
Memorization of parameters set for each bottle size, with the possibility to select them from the operator touch screen panel.
External product feeding tank complete with level control, infeed valve, spray ball for cleaning, pump for product transfer to the filling valves.
Product transfer from external feeding tank to the filling valves by pump driven by inverter to keep constant pressure or by gravity (for foaming products).
Lower manifold for the connection fixed pipe – rotating pipe with special treatment in the sliding parts to guarantee longer life.
Product distribution from central pipe to filling valves with small distributor easy to clean.
Upper manifold for compressed air and electric signals distribution with special treatment in the sliding parts to guarantee longer life.
Small central manifold to feed the filling valves.
Parts in contact with the product in stainless steel AISI 304 (standard) or AISI 316 (on demand).
Sealing rubber complying with food norms.
Machine predisposed for hot CIP in recirculation (CIP group excluded).
Dummy bottles with manual (standard) or automatic (on demand) set up.
Carousel frame manufactured in stainless steel AISI 304.
Bottle neck grippers fixed to the carrousel without bottle lifters, to keep the bottles centered under the filling valves.
Machine available in “neck handling” version (fixed height carrousel and bottle support in the neck, typically used for PET bottles) or in “body handling” version (height adjustable carrousel and bottle support in the bottom, typically used for glass bottles or bottles with neck finish without ring).

OPTIONS & DETAILS
FOCUS ON: ELECTRONIC VOLUMETRIC FILLING

The system guarantees the volume inside the bottle by means a flowmeter.
Flowmeter’s output is in pulses, that are processed by an electronic board in communication with the PLC and with the electrovalves that drives the opening of the filling valve. When the number of counted pulses equals the number of pulses set for the working size, the filling valve is closed.

This system allows contact less filling, which means:

Not to have the bottle sealing;
Not to have lifting pistons;
Not to have mechanisms for the fill level adjustment;

The inductive flow meter is suitable for conductive products, in case of not conductive products a mass flow meter can be used.

VMAG Falsa bottiglia manuale

Dummy bottles fixed to a support present on the machine, to be manually screwed to the filling valve terminal during the CIP.

Automatic dummy bottle that can be loaded and downloaded from touch panel without entering in the machine.
This solution allows:

Higher level of hygiene.
Reduction of the manpower time.

serbatoio-ingresso-prodotto

External tank
To have an external tank simplifies the internal structure of the filler.
The external tank can be easily cleaned with spray ball and it is possible to inspect it simply removing its cover.
Product pump control
Pump speed is controlled with frequency converter using the signals coming from a pressure transducer positioned on the delivery pipe.
This solution allows having constant pressure at the filling valves, which means higher filling accuracy.

Small central manifold that guarantees cleaning easiness.

The parameters for each bottle size are memorized in recipes that can be quickly loaded from touch panel.

index-pdf-file-google-searchDownload Brochure
VMAG Filling system

VIDEO RELATED

    VMAG Filling System
    BASELESS VMAG 42-42-10 neck

    BASELESS VMAG 24-24-10 Neck

    COMPACT VMAG 21-28-7 neck
    [:it]

    SISTEMA DI RIEMPIMENTO ELETTRONICO VOLUMETRICO BASATO SU FLUSSIMETRI MAGNETICI

    IL MODERNO SISTEMA PER RIEMPIRE ACQUA PIATTA IN CONDIZIONI FLESSIBILI ED IGIENICHE

    Riempimento elettronico volumetrico con misuratori di flusso magnetici.
    Il funzionamento degli strumenti è garantito per liquidi piatti con conducibilità elettrica specifica superiore a 50 ųS/cm ( considerati alla temperatura di riempimento).
    Riempimento senza contatto tra bottiglia e valvola di riempimento.
    Apertura valvola di riempimento mediante elettrovalvola pneumatica azionata da sensore di presenza bottiglia (apertura) e segnale misuratore di flusso (chiusura).
    Riempimento a due velocità, per garantire minore tempo di riempimento ed evitare fuoriuscita di prodotto dalla bottiglia.
    Moduli elettronici necessari alla gestione del segnale del flussimetro e delle elettrovalvole di comando valvola di riempimento installati sulla giostra, per garantire rapido accesso.
    Regolazione del volume da riempire per ogni valvola di riempimento attraverso terminale operatore touch screen.
    Memorizzazione dei parametri di riempimento per ogni formato bottiglia, con possibilità di selezionarli dal terminale operatore touch screen.
    Serbatoio esterno di alimentazione prodotto completo di controllo di livello, valvola di ingresso, spray ball per il lavaggio, pompa di invio prodotto alle valvole di riempimento.
    Trasferimento prodotto dal serbatoio esterno alle valvole di riempimento attraverso pompa pilotata da inverter per mantenere costante la pressione di riempimento.
    Collettore inferiore di collegamento tubazione fissa – tubazione rotante realizzato con parti in scorrimento con speciale trattamento superficiale per garantire lunga durata.
    Distribuzione prodotto dalla tubazione centrale alle valvole di riempimento mediante collettore di piccole dimensioni facilmente lavabile.
    Collettore superiore distribuzione aria compressa e segnali elettrici realizzato con speciale trattamento superficiale sulle parti in scorrimento per garantire lunga durata.
    Parti a contatto col prodotto in acciaio AISI 304 (standard) o AISI 316 (su richiesta).
    Gomme di tenuta conformi alle normative alimentari.
    Macchina predisposta per il CIP a caldo, in ricircolo (Gruppo CIP escluso).
    False bottiglie ad installazione manuale (di serie) o automatica (opzionale).
    Struttura della giostra realizzata in acciaio inox AISI 304.
    Centraggio bottiglie al di sotto delle valvole di riempimento mediante pinze presa collo, senza la necessità di martinetti di sollevamento.
    Macchina disponibile in versione “neck handling” (giostra ad altezza fissa e supportazione bottiglia nel collo, tipicamente usata per bottiglie PET) o in versione “body handling” (giostra regolabile in altezza e supporto bottiglia dal fondo, tipicamente usate per bottiglie vetro o bottiglie con collo senza anello di baga).

    OPZIONI & DETTAGLI

    Il sistema garantisce il volume di prodotto in bottiglia attraverso un misuratore di portata.
    Il misuratore di portata ha come uscita degli impulsi, che vengono elaborati da una scheda elettronica in comunicazione con il PLC e con le elettrovalvole che comandano l’apertura della valvola di riempimento. Quando il numero di impulsi contati eguaglia il numero di impulsi per il formato in lavoro, la valvola di riempimento viene chiusa..
    Questo sistema permette di avere un riempimento senza contatto il che significa:

    Non avere la guarnizione di tenuta bottiglia, sempre critica dal punto di vista igienico;
    Non avere pistoni di sollevamento;
    Non avere sistemi di regolazione del livello meccanici;

    Il misuratore magnetico è idoneo a prodotti conducibili; nel caso di prodotti non conducibili può essere sostituito con misuratori massici.

    VMAG Falsa bottiglia manuale

    Falsa bottiglia fissata su un supporto presente sulla macchina, da avvitare manualmente al terminale della valvola di riempimento durante il CIP.

    VMAG False Bottiglia Automatica

    Falsa bottiglia automatica che può essere caricata e scaricata da pannello operatore touch screen senza entrare nella macchina.
    Questa soluzione permette:

    Livello elevato d’igiene.
    Riduzione del tempo di intervento manuale.

    serbatoio-ingresso-prodotto

    Serbatoio esterno
    Avere un serbatoio esterno permette di avere una struttura semplice della riempitrice.
    Il serbatoio esterno può essere lavato facilmente con una spray ball.
    Pompa prodotto
    La velocità della pompa è regolata mediante inverter azionato dai segnali proveniente da un trasduttore di pressione montato sul tubo di mandata. Questa soluzione consente di avere pressione costante alle valvole di riempimento, il che significa avere elevata precisione di riempimento.

    VMAG Collettore

    Collettore centrale di piccola dimensione che garantisce facilità di pulizia.

    VMAG Schermata

    I parametri per ogni formato bottiglia sono memorizzati in ricette che possono essere caricate rapidamente dal pannello operatore touch screen.

    index-pdf-file-google-searchDownload Brochure
    VMAG Filling system

    VIDEO CORRELATI


    VMAG Filling System

    BASELESS VMAG 42-42-10 neck

    BASELESS VMAG 24-24-10 Neck

    COMPACT VMAG 21-28-7 neck
    [:fr]

    SYSTEME DE REMPLISSAGE ELECTRONIQUE VOLUMETRIQUE BASE’ SUR DEBITMETRES MAGNETIQUES

    LE MODERNE SYSTEME POUR REMPLIR EAU PLATE EN CONDITIONS FLEXIBLES ET HYGIENIQUES


    CARACTÉRISTIQUES GÉNÉRALES

    Remplissage électronique volumétrique avec débitmètres magnétiques. Le fonctionnement est assuré pour produits plats avec une conductibilité électrique supérieure au 50 μS/cm (à la température de remplissage).
    Remplissage sans contact entre la bouteille et la vanne de remplissage.
    Ouverture vanne de remplissage par vanne pneumatique actionnée par le signal de présence bouteille (ouverture) et le signal du débitmètre (fermeture).
    Remplissage à deux vitesses, pour avoir temps de remplissage plus rapide et éviter sortie de produit de la bouteille.
    Modules électroniques pour la gestion du signal des débitmètres et électro vannes de commande de la vanne de remplissage installées sur le carrousel, pour avoir un accès facile.
    Réglage du volume à remplir pour chaque vanne de remplissage par écran operateur tactile.
    Mémorisation des paramètres de remplissage pour chaque format bouteille, avec possibilité de les sélectionner de l’écran operateur tactile.
    Bac extérieur d’alimentation produit, avec contrôle de niveau, soupape d’entrée, boule de lavage pour le nettoyage, pompe d’envoi produit aux vannes de remplissage.
    Pompe d’envoi produit du bac extérieur aux vannes de remplissage contrôlée par variateur de fréquence afin de maintenir une pression constante de remplissage.
    Collecteur inferieur de passage tuyau fixe – tuyau tournant avec parties en glissement avec traitement de surface spécial garantir une longue durée.
    Distribution produit du tuyau central aux vannes de remplissage par distributeur de petite dimension facile à nettoyer.
    Collecteur supérieur pour la distribution air comprimé et des signales électriques avec traitement de surface spécial pour garantir une longue durée.
    Parties en contact avec le produit en acier inox AISI 304 (standard) ou AISI 316 (à la demande).
    Parties de tenue aptes à l’emploi alimentaire.
    Machine avec prédisposition à l’assainissement à chaud (NEP) en recirculation (unité NEP exclu).
    Fausses bouteilles à installation manuelle (standard) ou automatique (à la demande).
    Structure du carrousel en acier inox 304.
    Centrage bouteilles sous les vannes de remplissage avec pinces de prise col, sans la nécessité de pistons de soulèvement.
    Machine disponible en version « neck handling » (carrousel à hauteur fixe et support bouteille par le col, solution typique pour bouteilles PET) ou en version « body handling » (carrousel à hauteur réglable et support bouteille par le fond avec plateaux, solution typique pour bouteilles verre ou bouteilles avec col sans anneau de bague).

    index-pdf-file-google-searchDownload Brochure
    VMAG Filling system

    OPTIONS ET DÉTAILS

    Le système assure le volume de produit dans la bouteille par un débitmètre.
    Le débitmètre a comme sortie des impulsions qui sont traitées par une carte électronique en communication avec l’automate et les électrovannes qui commandent l’ouverture de la vanne de remplissage. Lorsque le nombre d’impulsions comptées est égal au nombre d’impulsions pour le format en travail, la vanne de remplissage est fermée .

    Ce système permet d’avoir un remplissage sans contact, ce qui signifie de:

    Ne pas avoir le joint d’étanchéité bouteille, toujours critique du point de vue de l’hygiène;
    Ne pas avoir pistons de levage;
    Ne pas avoir des systèmes mécaniques de réglage du niveau;

    Le débitmètre magnétique est apte pour les produits conductibles; dans le cas des produits non conductibles, il peut être remplacé par débitmètre massique.

    VMAG Falsa bottiglia manuale

    Fausse bouteille fixée à un support présent sur la machine, à visser à mains au terminal de la vanne de remplissage pendant le NEP.

    Fausse bouteille automatique qui peut être chargée ou déchargée du écran operateur tactile sans entrer dans la machine.

    Cette solution permet:

    Haut niveau d’hygiène;
    Réduction de temps d’intervention manuel;

    serbatoio-ingresso-prodotto

    Bac extérieur
    Avoir un bac extérieur permet d’avoir une structure simple de la remplisseuse.
    Le bac extérieur peut être lavé facilement avec une boule de lavage et c’est possible de l’inspecter simplement enlevant le couvercle supérieure.
    Pompe produit
    La vitesse de la pompe est contrôlée par variateur de fréquence piloté avec le signal d’un transducteur de pression positionné sur le tuyau d’envoi.
    Cette solution permet d’avoir une pression constante aux vannes de remplissage, ça veut dire meilleur précision de remplissage.

    Collecteur central de petite dimension pour garantir facilité de nettoyage.

    Les paramètres pour chaque format bouteille sont mémorisées en recettes qui peuvent être chargées rapidement du écran operateur tactile.


    VIDÉO CONNEXE

      VMAG Filling System

      BASELESS VMAG 42-42-10 neck

      BASELESS VMAG 24-24-10 Neck
      COMPACT VMAG 21-28-7 neck 
       [:es]

      ELECTRONIC VOLUMETRIC FILLING SYSTEM BASED ON MAGNETIC FLOWMETERS

      THE MODERN SYSTEM TO FILL STILL WATER IN HYGENIC AND FLEXIBLE CONDITIONS

      [vc_custom_heading text=”GENERAL FEATURES” font_container=”tag:h3|text_align:left” google_fonts=”font_family:Droid%20Sans%3Aregular%2C700|font_style:700%20bold%20regular%3A700%3Anormal”]
      • Electronic volumetric filling system based on magnetic flow meters.
        The functioning of these instruments is guaranteed for still products with specific electric conductivity higher than 50 uS/cm (value to be considered at the filling temperature).
      • Filling without contact between bottle and filling valve.
      • Filling valve opening by pneumatic electro valve driven by bottle presence sensor signal (opening) and flow meter signal (closure).
      • Double filling speed, to guarantee reduced filling time and to avoid product splash out.
      • Electric board for the flow meter signal management and electro valves for filling valve controls installed on the carousel to guarantee easy access.
      • Volume set up for each filling valve in the operator touch screen panel.
      • Memorization of parameters set for each bottle size, with the possibility to select them from the operator touch screen panel.
      • External product feeding tank complete with level control, infeed valve, spray ball for cleaning, pump for product transfer to the filling valves.
      • Product transfer from external feeding tank to the filling valves by pump driven by inverter to keep constant pressure or by gravity (for foaming products).
      • Lower manifold for the connection fixed pipe – rotating pipe with special treatment in the sliding parts to guarantee longer life.
      • Product distribution from central pipe to filling valves with small distributor easy to clean.
      • Upper manifold for compressed air and electric signals distribution with special treatment in the sliding parts to guarantee longer life.
      • Small central manifold to feed the filling valves.
      • Parts in contact with the product in stainless steel AISI 304 (standard) or AISI 316 (on demand).
      • Sealing rubber complying with food norms.
      • Machine predisposed for hot CIP in recirculation (CIP group excluded).
      • Dummy bottles with manual (standard) or automatic (on demand) set up.
      • Carousel frame manufactured in stainless steel AISI 304.
      • Bottle neck grippers fixed to the carrousel without bottle lifters, to keep the bottles centered under the filling valves.
      • Machine available in “neck handling” version (fixed height carrousel and bottle support in the neck, typically used for PET bottles) or in “body handling” version (height adjustable carrousel and bottle support in the bottom, typically used for glass bottles or bottles with neck finish without ring).
      [vc_custom_heading text=”OPTIONS & DETAILS” font_container=”tag:h1|text_align:left” google_fonts=”font_family:Droid%20Sans%3Aregular%2C700|font_style:700%20bold%20regular%3A700%3Anormal”][vc_tta_accordion style=”modern” c_icon=”triangle” active_section=”1″]

      The system guarantees the volume inside the bottle by means a flowmeter.
      Flowmeter’s output is in pulses, that are processed by an electronic board in communication with the PLC and with the electrovalves that drives the opening of the filling valve. When the number of counted pulses equals the number of pulses set for the working size, the filling valve is closed.

      This system allows contact less filling, which means:

      • Not to have the bottle sealing;
      • Not to have lifting pistons;
      • Not to have mechanisms for the fill level adjustment;

      The inductive flow meter is suitable for conductive products, in case of not conductive products a mass flow meter can be used.

      VMAG Falsa bottiglia manuale

      Dummy bottles fixed to a support present on the machine, to be manually screwed to the filling valve terminal during the CIP.

      Automatic dummy bottle that can be loaded and downloaded from touch panel without entering in the machine.
      This solution allows:

      • Higher level of hygiene.
      • Reduction of the manpower time.
      serbatoio-ingresso-prodotto

      External tank
      To have an external tank simplifies the internal structure of the filler.
      The external tank can be easily cleaned with spray ball and it is possible to inspect it simply removing its cover.
      Product pump control
      Pump speed is controlled with frequency converter using the signals coming from a pressure transducer positioned on the delivery pipe.
      This solution allows having constant pressure at the filling valves, which means higher filling accuracy.

      Small central manifold that guarantees cleaning easiness.

      The parameters for each bottle size are memorized in recipes that can be quickly loaded from touch panel.

      [/vc_tta_accordion][vc_separator]
      [vc_btn title=”DISCOVER BASELESS TECHNOLOGY” style=”custom” custom_background=”#cc0000″ custom_text=”#ffffff” size=”lg” align=”center” i_icon_fontawesome=”fa fa-link” link=”url:http%3A%2F%2Fwww.mnmetalnova.it%2Fproducts-2%2Fbaseless%2F||” add_icon=”true”]
      [vc_btn title=”SEE MONOBLOCS SOLUTIONS” style=”custom” custom_background=”#cc0000″ custom_text=”#ffffff” size=”lg” align=”center” i_icon_fontawesome=”fa fa-link” link=”url:http%3A%2F%2Fwww.mnmetalnova.it%2Fmonoblocs%2F||” add_icon=”true”]

      index-pdf-file-google-searchDownload Brochure
      VMAG Filling system

      [vc_separator border_width=”2″][vc_custom_heading text=”VIDEO RELATED” font_container=”tag:h1|text_align:left” google_fonts=”font_family:Droid%20Sans%3Aregular%2C700|font_style:700%20bold%20regular%3A700%3Anormal”]
      [vc_custom_heading text=”VMAG Filling System” font_container=”tag:h1|text_align:center|color:%23ffffff” google_fonts=”font_family:Exo%3A100%2C100italic%2C200%2C200italic%2C300%2C300italic%2Cregular%2Citalic%2C500%2C500italic%2C600%2C600italic%2C700%2C700italic%2C800%2C800italic%2C900%2C900italic|font_style:300%20light%20regular%3A300%3Anormal”]
      [vc_custom_heading text=”BASELESS VMAG 42-42-10 neck” font_container=”tag:h1|text_align:center|color:%23ffffff” google_fonts=”font_family:Exo%3A100%2C100italic%2C200%2C200italic%2C300%2C300italic%2Cregular%2Citalic%2C500%2C500italic%2C600%2C600italic%2C700%2C700italic%2C800%2C800italic%2C900%2C900italic|font_style:300%20light%20regular%3A300%3Anormal”]
      [vc_custom_heading text=”BASELESS VMAG 24-24-10 Neck ” font_container=”tag:h1|text_align:center|color:%23ffffff” google_fonts=”font_family:Exo%3A100%2C100italic%2C200%2C200italic%2C300%2C300italic%2Cregular%2Citalic%2C500%2C500italic%2C600%2C600italic%2C700%2C700italic%2C800%2C800italic%2C900%2C900italic|font_style:300%20light%20regular%3A300%3Anormal”]
      [vc_custom_heading text=”COMPACT VMAG 21-28-7 neck” font_container=”tag:h1|text_align:center|color:%23ffffff” google_fonts=”font_family:Exo%3A100%2C100italic%2C200%2C200italic%2C300%2C300italic%2Cregular%2Citalic%2C500%2C500italic%2C600%2C600italic%2C700%2C700italic%2C800%2C800italic%2C900%2C900italic|font_style:400%20regular%3A400%3Anormal”]
      [:]